Check routing

Input

time - here you can specify date and time for which to check hunting.
This might be handy when you actively use activation date or Timetable in Prices, then routing will be performed according to this data.

E.164 caller ID - check routing taking into account A-number.
This might be handy if A-number filtration is configured.

E.164 callee ID - field to enter B-number or destination code for which to check routing.
technology - need to specify inbound Signalling protocol for which to check routing.
node - specify node for which to check hunting.
This might be handy for Clustering case.
replace caller/caller ID - if enabled, caller/callee Regex patterns will be taken in account.
check number format - check that number has enough digits according to E.164 codes.
outbound peer - if specified and routing to this peer does not pass, the system displays the reason.

Output

Upper table - information of a call regarding inbound peer.
Lower table - routes to outbound peers.

Debugging

In case if when Checking routing some dialog with information is displayed - therefore there is an issue in peer settings, for which you check routing.
In case if when Checking routing you see a price for peer for which you check routing (upper table), but don't see expected route(s), enter in field outbound peer a name of expected terminator/gateway/user and system will show, why there is no route to it.

Errors

Peer is disabled
In peer's settings option enabled = no

E.164 callee ID is blocked
In peer's settings either destination code or destination zone is blocked

E.164 caller ID is inside a black list
In peer's settings black caller ID pool is configured and specified caller ID is inside that list

Caller name is inside a black list
In peer's settings black caller name pool is configured and specified caller name is inside that list

E.164 callee ID is inside a black list
In peer's settings black callee ID pool is configured and specified number is inside that pool

Blocked by Origination controller
Dialed number is blocked by Origination control

Route class is not configured
Route class is not configured on peer

Route class is not active at chosen time
There is a Route class chosen on peer, inside which there is a Timetable which doesn't match time specified when checking routing.

Unable to initialize peer
There are references inside peer to deleted entities (for example, deleted Billing pack).
Try to save peer settings again to update those references.

No matching technology configured
There is no technology configured in peer settings which matches chosen technology when checking routing (for example. SIP)

Profit is not acceptable
According to Profit control it's not possible to route a call to this peer

No route in route class
There is no route to this peer inside Route class, which activation time and timetable matches time specified when checking routing

Wrong peer name
Specified peer doesn't exist

Unable to replace E.164 caller ID
Unable to replace caller ID according to Caller ID replace patterns in peer's settings

Unable to replace caller name
Unable to replace caller name according to Caller name replace patterns in peer's settings

Unable to replace E.164 callee ID
Unable to replace callee ID according to Callee ID replace patterns in peer's settings

Unable to initialize billing
There is no Billing pack configured in peer's settings, or there is no suitable price for entered number inside Billing pack

Destination code is disabled
Specified billing code is disabled inside Billing pack, which is configured on a peer

Blocked by Termination controller
Termination controller decided to block this billing code

Outbound calls are not permitted due to balance
Peer Balance doesn't allow to perform calls

Endless recursion in route class configuration
Route class contains reference to base route class, while the latter directly or indirectly refers to this route class.

Loop to the same peer
Call is blocked because there is is a routing loop to the same peer from which the call came inside Route class.

Loop to the same company
Call is blocked because there is is a routing loop to the same company from which the call came inside Route class.

Unable to initialize routing
There is no Route class configured in peer's settings, or in specified route class there are references to deleted entities (for example. Hunting class)

Русский перевод

check_routing.gif (9.88 KB) Andrii Arsirii, 01/09/2017 10:16 PM

check_routing2.gif (12.3 KB) Andrii Arsirii, 01/09/2017 10:22 PM

Also available in: PDF HTML TXT