Configure Terminator with the Softswitch¶

Now we shall add terminator.

Go to Home >> Dial-peers >> Terminators. Here you can see the
list of providers just like this:

If your system is fresh, this list will be empty. Now we'll start
filling it. Press "Add". You'll see screen like this:

1. Give name to terminator, for example, "great_provider_gw1".
2. Select terminators's company (GreatProvider) from combo-box.
3. Select terminator's billing pack (great_provider1_pack) from combo-box.
4. Select Call Handler "dial" from the basic Softswitch service pack.
5. As our terminator will support H323 only, uncheck SIP.
6. Press "Commit". Now you will see this terminator in the list.

Now we must complete terminator's configuration. Press "Edit" on
him. You'll see screen like this:

Pay attention to the links that appeared in the bottom. As
provider uses H323 protocol, let's configure it. Press the "Add"
link at the H323 row. You'll see this:

Set host field to "Y.Y.Y.Y" and press "Commit".

Now we must tell the system which node should take this peer into
its RAM configuration (this is extremely useful for cluster
configurations), Press "Nodes" link in the terminator edit mode
and press "Add" there. You'll see:

Select needed node. In single-node configuration there will be only
one choice available. Press "Commit".

Congratulations! Terminator is configured.