h1. Configuring virtual PBX by virtual PBX administrator

This stage is performed by VPBX administrator, which has been added in section [[Configuring virtual PBX by virtual PBX administrator]]), in his personal web-cabinet.
Your employees don't participate in this stage.
The web cabinet has very limited functionality compared with Smartswitch administrator web-cabinet:

!virt_pbx_index.gif!

Let's suppose, administrator of virtual PBX is going to configure such PBX: 

# Managers group "Managers".
# Manager Ann - internal number 100.
She is located at office, dynamically registers on *Smartswitch*, using SIP name and secret code.
# Manager John - internal number 101.
He is located at office, dynamically registers on *Smartswitch*, using SIP name and secret code.

*Smartswitch* is used in following basic scenarios:
   
* calls from external world      
# on incoming call from external world call is directed to VPBX administrator (see [[Configuring virtual PBX by Smartswitch administrator]]), *Smartswitch* answers the call.   
# *Smartswitch* plays audio prompt to enter extension number and waits for input for 5 seconds. 
# The call is directed to manager, when caller enters his extension number. 100 - for Ann, 101 - for Ivan.
# If caller hasn't entered anything during 5 seconds - call is forwarded to Ann.

* internal calls
 - John dials 100 and is connected with Ann.
 - John dials international number and call is routed through providers, configured by Smartswitch administrator (see [[Configuring virtual PBX by Smartswitch administrator]]).    
 - Ann dials 101 and is connected with John.
 - Ann dials international number and call is routed through providers, configured by Smartswitch administrator (see [[Configuring virtual PBX by Smartswitch administrator]]).

Internal numbers are local for this PBX.
Other configured PBXs could have repeating internal numbers, while they will be isolated from each other, because users by default can dial only users from their user group.

h2. Configuring

# [[Configuring user group for virtual PBX|Configuring user group]]
# [[Configuring users for virtual PBX|Configuring users]]
# [[Uploading audio prompt for virtual PBX]]
# [[Configuring redirection of incoming call to Ann]]

Also you could complement configuration with [[Configuring VAS|VAS]], many of which are enabled by default.

PBX users could log into their *web-cabinet* to:

* view statistics
* initiate calls
* send faxes
* use features of [[CRM system]].

See instruction [[Providing web-access to user]] for details.

[[Конфигурирование виртуальной АТС администратором виртуальной АТС|Русский перевод]]