h1. Configuring virtual PBX administrator group

1. Add new user group to  Dial-peers -> User groups:

!virtual_pbx_user_group.gif!

Set *name* = Virtual PBX
Set *dealer* = yes (see section [[Dealer]] for details)
Set Inbound -> *billing pack* = Virtual PBX (for local and international calls)
Set Outbound -> *billing pack* = zero (for calls towards users)
Set Inbound -> *route class* = External (it has been created in [[Configuring routing of external calls]])
Set Balance -> *balance cut-off* = yes
Save.

2. Press "+" near Technologies -> SIP. 
Save.

3. Press "+" near General -> web-access

!virtual_pbx_web_access.gif!

Choose *role* "Virtual PBX administrator".
Save.

4. Save

h2. Check routing

Press Dial-peers -> User groups (Virtual PBX) -> Check routing.
Specify *callee ID* = 380442400426.
You should see correct routing to "VoIP termination provider":

!virtual_pbx_check_routing.gif!

In case if you don't see route to "VoIP termination provider", likely you have missed some of steps described.
To debug, when checking routing, specify *outbound peer* = _VoIP termination provider_ and system will show you, why route to "VoIP termination provider" is absent in route list.

[[Конфигурирование группы администраторов виртуальных АТС|Русский перевод]]