h1. Configuring user group for PBX

1. Go to Dial-peers -> User groups

!pbx_user_group.gif!

# Set *name* = Managers  
# Choose Inbound -> billing pack and Outbound -> billing pack = "zero", to bill all calls as 0.
# Choose Inbound -> route class = External (created previously inside [[Configuring routing of external calls]])
# Save.  
# New links for configuration should apper.
  Press "+" near Technologies -> SIP.
  Leave all defaults and save.
# Save

h2. Check routing

Press Dial-peers -> User groups (Managers) -> Check routing.
Specify *callee ID* = 380442400426.
You should see routing to "VoIP termination provider":

!pbx_user_group_check_hunting.gif!

In case if you don't see the route to "VoIP termination provider", you've likely missed some of configuration steps.
To debug, when checking routing, specify *outbound peer* = _VoIP termination provider_ and system will show you, why there is no route to "VoIP termination provider" in the list of routes.

[[Конфигурирование группы пользователей для АТС|Русский перевод]]