h1. Configuring message sending through SMPP connection

This solution is described in section [[Message sending through SMPP connection]].
To simplify, let's assume that this service will be provided free of charge.

1. Configure [[Message routing]].
This is describe in section [[Configuring message routing]].

2. Choose configured [[Route class]] on user group or user of interest.

3. Set Inbound -> billing pack for messages = 'zero' on user group or user of interest.

4. Add Technologies -> SMPP on user group of interest:

!user_group_smpp.gif!

Leave all defaults.

5. Add Technologies -> SMPP on user of interest.

!user_smpp.gif!

Set *host*, if you wish to limit SMPP connection from specific IP address.
Set *system ID* - this is login.
Set *password*.

[[Конфигурирование отправки сообщений через SMPP подключение|Русский перевод]]