Configure Originator with Calling Cards¶

Now we shall add originator.

Go to Home >> Dial-peers >> Originators. Here you can see the list of originators just like this:

If yours is empty, don't worry - now we'll start filling it.
Press "Add" now. You'll see the following screen:

1. Give name to originator, for example, "telco_gw1".
2. Select originator's company (Telco) from combo-box.
3. Select originator's billing pack (empty) from combo-box. "Empty" is pre-defined billing pack that has price of zero for all destinations.
4. Select "calling cards" call handler.
5. Select "default" hunting class.
6. As our originator supports SIP only, uncheck the H323 check box.
7. Press "Commit".

Now you will see a new originator in a list.

Now you must complete originator's configuration.

Press "Edit" near originator in a list. You'll see a screen like this:

Look at the links at the bottom. They will help us to finalize the configuration.

As our customer uses SIP, press "Add" in the SIP row. You'll see a screen like this:

Uncheck here "dynamic" and fill "host" to "X.X.X.X" and press "Commit".

Now we must tell the system which node should take this peer into its RAM configuration
(this is extremely useful for cluster configurations), Press "Nodes" link in the originator edit mode and press "Add" there. You'll see:

Select needed node. In single-node configuration there will be only one choice available. Press "Commit".